Tips For Replacing a Window Handle
It is easy to change your window handle from the at-home comforts of your home. Follow these guidelines to ensure an elegant and smooth finish.
Remove the screws from your uPVC handle to expose the screws. Measure the spindle's length to ensure you get the correct size replacement.
1. Take a measurement of the length of the Spindle.
It is crucial to ensure the correct size of the spindle when replacing the window handle. This is because it can determine how tight or loose the handle is, and whether it's able to lock properly within the frame of the window. The spindle is the steel shaft that connects to the handle as well as the lock within the window frame. The spindle is available in the standard 8mm cross-section for industry or the more traditional versions of 9mm. Modern industry standards are 8mm, however it wasn't always this way. It is crucial to verify the measurements prior to purchasing the handle you want to purchase.
The most efficient method to determine the spindle length is to take off the handle you have already installed, this can be done by turning it into an open position and unscrewing the two screws (which may be hidden behind plastic caps that need to be removed) that hold the handle. After removal, you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements needed to buy a replacement.
There are many options available when you're looking to select a new window handle. From sleek chrome that can fit into modern homes to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more quaint Tudor Cottages with curled mongoose-tail latches. The options are endless but the most important thing to do is choose a style that suits your home.
Espag handles are typically fitted to uPVC windows and are identical in size, with 43mm centers (2 fixings). Cockspur handles are available in a range of sizes, starting at 58mm to 62mm. Window handles made of Cadenza are a different size again because they feature an angled blade that operates a multi-point locking mechanism inside the window.
Another factor when choosing the best window handle is determining what hand you will need to use, which is defined by what hand you use to open the door. Inline Espag window handles aren't handed and can be used for left or right handed windows. Cranked window handles are only compatible for windows that are open in one direction.
2. Remove the Handle
A window handle that is sagging is a frustrating experience, regardless of regardless of whether the handle has been damaged or worn out. The good news is that you can fix the uPVC handle yourself. You will require only the most basic hand tools and time to complete this process.
First, you have to open the window and ensure that it is in the unlocked position. Next, you need to remove the screws that are holding the handle in place. Once these are removed, you can begin to work on removing the handle itself.
The handle itself is attached to a spindle in the window frame. The handle is held in place by a pin or a screw according to the type of handle. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both these types of handles are utilized on casement windows, which includes aluminium windows. They can be locked with keys to stop unauthorised opening of the window from the outside, or you can lock them by turning the handle clockwise.
To remove the handle, you will require a flat-bladed screwdriver. Once the clip is released, the handle will slide off the spindle. Once the old handle is removed, you'll need to measure the length of the spindle and ensure that your new handle is compatible with this measurement.
Once you have the proper size, you can fix the new handle into the correct position. You will need to ensure that the new handle is firmly fixed and is turning in the correct way (clockwise for open, or counterclockwise for closed). It is crucial to make sure that the handle has not been placed upside down.
Replace the cap screws. After you have completed this step, you can test your handle to make sure that it's working properly. You can also test the locking mechanism by moving the handle from the unlocked position to the locked one and back.
3. Take off the Screws
A uPVC handle is an essential element of any home and is the first item to show signs of wear or damage. This could be due natural factors, regular usage, or even deliberate damage by criminals looking to gain access to your home. However, a simple replacement is a simple solution and stop the problem from occurring again.
uPVC handles could also be difficult to remove if the locking mechanisms aren't working correctly. It's usually possible to resolve the problem by replacing the multipoint locking mechanism rather than the whole handle. This could save you money.
Once you've removed your old handle, you'll have to remove the screws that held it in place. These screws are usually located on the inside of the handle base. You may require a screwdriver for this and it's important that you don't over tighten as this can cause the handle to loosen.
Then, you'll have to locate the screws or pins that keep the handle in place. They are typically located on the inside of the base of the handle. You'll require a screwdriver to take them off. If you want to, you can replace the caps on the screw and check the handle to ensure it is working properly.
Install the handle by adjusting the spindle with the window's cutout mechanism. Then screw it into. Make sure the handle is in the open position and that the screws are securely secured prior to replacing the screw covers in the event that you want to do this. Once this is complete you're all done and you are able to enjoy your new window handle. I hope this will enable you to avoid the need for expensive window and door replacements in the future. If you'd like to get more assistance in this, or any other aspect of your uPVC windows do not hesitate to contact us.
4. Install the new handle
If you're replacing a damaged handle or simply changing it the procedure is easy and can be accomplished in just a few steps. Identifying the kind of window handle, determining its spindle length and knowing the tools you'll require to finish the job are crucial. Safety is always the top priority when working with windows and tools. upvc door handle www.repairmywindowsanddoors.co.uk is also essential to take your time and follow the steps with care to ensure you have a functioning handle that is safe to use.
To begin, locate the screws that hold your window handle. Remove these while holding the handle firmly to stop it from falling and causing an injury. Once the screws have been removed, you can place them in a safe location to be replaced later.
After removing the old handle, you can now begin to install your new one. It is important that the handle is fitted perfectly to ensure it functions correctly and locks the window in position. The next step is to slide the metal square on the back of the handle into the hole in your window mechanism, making sure it is securely in place.
Now that the new handle is in place, the final thing to do is replace the screw caps and test it to make sure it functions. If you aren't satisfied with the results or if your window does not open and close properly contact our experts for help.
Almost all homes in the UK have uPVC windows, and as such, many of them will require to be replaced in the near future because of wear or damage. Anyone with a bit of DIY knowledge can carry out the process. The most important factor in the success of the procedure is to ensure that you're using a handle that is compatible with your existing window in terms of dimensions and style. If you're not sure about the type of handle you require, please reach out to our team, who can guide you through the options available.